This article contains the FAQs for the NZ801UK Series Shark® Powered Lift-Away™ DuoClean™. This supports the following product SKUs NZ801UK and NZ801UKT.
The cord is 8 meters long.
First, remove the cord from the cord clip, then press the wand release button located near the top of the canister behind the wand. Gently pull up on the handle to remove the wand. Add the desired accessory to the end of the wand and begin cleaning. To replace, simply guide the wand behind the canister and press down until you hear a click.
With the dust cup removed, remove and rinse the foam and felt filters every 3 months. Let air dry completely before replacing. Hand wash only. Tap loose dirt off filters between washes as needed.
Pull up on the dust cup release latch and lift the dust cup off the pod.
Two unique brush rolls work together to effortlessly remove the three types of mess from carpets and hard floors. Removing small and large messes in a single pass and lifting stubborn stuck on layers of dust, whilst restoring floors natural lustre. The addition of the second soft brush roll means you can enjoy a continuous deep clean between carpets and hard floors without stopping to switch heads.
Parts and accessories are available here.
The motor is 750W.
2.5kg
Yes, this model comes with a foam and felt filter kit and we recommend that you rinse them every month.
The majority of consumers experience hair wrap on the brush rolls of their vacuum cleaner and they accept that the performance of their vacuum may be affected if don’t remove it, the specially designed comb actively separates and removes hair as you clean. Hair is sucked up into the dust cup, helping to leave your bristle brush-roll tangle-free. You may see hair on the brush-roll from time to time, during continual use of the vacuum cleaner the hair will be removed.